Tips to Decrease Kitchen Chimney Noise
The main thing considered by many people when purchasing a new kitchen chimney is suction power. Well, that’s no surprise as it is one of the primary factors that determine the performance of a kitchen chimney.
However, the more the suction power, the higher the chances of your new appliance producing irritating noise.
It can be very destructive to the point of affecting your cooking process. Fortunately, there are ways you can reduce this noise and create a favorable cooking space.
In this article, we have compiled tips aimed at helping you eliminate or at least reduce this problem.
Tips on how to eliminate or at least reduce the problem
Reduce the Number of Bends on the Duct
Are you installing a ducted kitchen chimney? One of the most common causes of chimney noise is the bends along the duct.
Therefore, to avoid being confronted by this problem, make sure you minimize the bends as much as possible.
One reason why this could be an issue is the fact that noise from the motor is reflected back to the hood.
As such, the echoes build up hence leading to a noisy appliance. It is recommended that the first bend should be at least 30cm from the connection point.
Switch on Your Chimney a Few Minutes Before Cooking
If you are looking for an effortless solution, then consider how you use your kitchen chimney. As earlier stated, the amount of noise produced depends on the chimney’s suction power.
As such, the best way to deal with this problem is to adjust how you use the appliance.
Switching the chimney at least five minutes before you start cooking could be your solution.
By so doing, it will absorb any odor, smoke, and other fumes present in the room. You can then switch it off as you cook.
Once done with your recipes, make sure to turn it back on for a few minutes so that any fumes produced are sucked from the room.
It is worth noting, though, that this could impact the effectiveness of your kitchen chimney.
Purchase a Chimney with an External Motor
The best way to deal with such problems is by being proactive. If you are already aware of this problem, it would be best to opt for chimneys with external motors.
As it turns out, motors are the main culprits when it comes to a noisy appliance.
During the installation process, your chimney’s motor is placed somewhere outside the kitchen. As such, you can run the appliance throughout your cooking process without any problems.
However, manufacturers offering this type of chimneys are very few in the market – and that could be an issue by itself.
Go For 3-Way Suction Chimneys
Many manufactures have addressed this issue in their subsequent products following complaints from consumers.
The current technology being utilized is a 3-way suction technology. Apart from doing a great job in eliminating gaseous wastes from the room, these chimneys are also near-silent.
The primary purpose of multiple inlets on this chimney is to suck fumes from all angles. However, what most people don’t know is the fact that this also reduces pressure inside the hood.
As such, the noise is reduced by about 70% as compared to traditional kitchen chimneys. Fortunately, there are many brands currently in the market offering this feature.
Noise from your kitchen chimney can be very irritating and could make your cooking space quite uncomfortable.
There are several ways to solve this problem, but some of them involve replacing your current appliance.
You can either buy one with an external motor or opt for a 3-way suction chimney.
If you cannot afford a new chimney, consider switching on the appliance a few minutes before cooking; then back off when you start cooking.