Samsung Washing Machine Problems

When it comes to washing machines and dryers, there’s no bigger or more reliable name than Samsung. They push out the very best washers, but this doesn’t make their products immune to breakdowns. 

Error Codes

 Samsung washing machines come with error codes, and as a user, you should become familiar with them. The error codes point in the direction of the fault in your washer.

Once you locate the fault, you can move on to start the repair.

Samsung washer won’t start

when all electrical connections are okay, and the display also says it is ready for the cycle, but the washer doesn’t start.

Solutions

for the washer to start, it’s an operation. The door must be properly locked. The door switch will keep the machine from working as long as it isn’t latched shut.

First, you should clean the contact points of the door latch with a cotton swab soaked in a little alcohol. If this doesn’t work, it can either be a result of a mechanical or an electrical fault in the door lock.

If the problem is detected in the latch, the door lock should be replaced. To repair an electrical fault, you’ll need a multimeter and your washer’s wiring diagram.

The function of the multimeter will be to check the door switches for any break in connections.

Samsung washer is leaving bleach spots

When you add bleach to the bleach dispenser, it is possible that bleach will remain in it after your laundry, resulting in undesired spots in the future laundry.

Solutions

To ensure that there’s no leftover bleach in the dispenser after use, there are simple things you should keep in mind.

Firstly, you should never exceed the max limit of your washer while adding bleach. Also, your washer should always be balanced during use.

When your washer is unbalanced, the dispenser won’t empty completely. Finally, you should always clean the dispenser after each use.

Control button / Display if Samsung washer is not functioning

when you do not get the desired response when you press the control buttons of your washer, there is a problem somewhere.

Solutions

First, you should check the buttons, see if they are stuck or worn out. If the buttons are okay, check the electrical connections.

The problem might be power not getting to the user control or display board. When the earlier stated steps fail, you should either replace the parts or call the repairman.

Samsung washer has trouble filling

when your washer takes too long to fill up or won’t fill at all, there is either an issue with the water supply or the supply path.

Solutions

when this problem arises, the first thing you should check is the water pressure. The valve that lets water into your washer requires a specific amount of pressure to open.

If the pressure is insufficient, you won’t get proper flow. Next, you should check the inlet valves for blockages. If you find no blockage, it is time to change the valve.

Samsung washer is making loud and unusual noise

when your washer starts making a vibrating, humming or grinding noise, it’s telling you something is wrong inside.

Solutions

The first thing you should check is the placement of your washer, ensure it is perfectly placed on the floor. If this isn’t the source of the problem, something needs to be replaced inside your washer.

In the case of a grinding noise, you should check out the tub bearing and the agitator cogs. For a vibrating noise, check out the drive motor, and it’s a coupling.

If it’s a banging noise you hear, check out the shock absorber and the suspension springs. Replace any faulty part.

Samsung washer is leaving stains on fabrics

this is when unusual purple stains are left on your laundry after a wash. The problem arises as a result of the use of excess detergents.

Solutions

this is quite a simple problem. To solve it, you only have to stick to the recommended amount of detergent.

Regardless of the size of laundry or water temperature, you should never add more than two teaspoons of detergent to a HE washer.

Samsung washer is tripping the electrical circuit

this is a serious problem that leads to the tripping of power in your home whenever your washer is put on.

Solutions: this is an electrical problem, a real hazard, and you should stop using the machine right away. Call in the repairman or better still, have the machine recalled.

Samsung washer is not draining properly: this problem arises mainly as a result of either a blocked drain pump or hose.

Solutions

for the drain pump, you should remove the pump and check for anything that could hinder the passage of water.

If there’s no obstruction and the problem persists during the drain cycle, change the drain pump. Repeat the same process with the hose.

Samsung washer stops during use

when your washer becomes unable to complete a spin cycle, it can be a result of a number of problems.

Solutions

The simplest solution would be to check the clothes inside the washer. When clothes get jammed or unbalanced, they cause the washer to shudder.

A simple rearrangement of the clothes will solve this problem. Another possible problem is a slow drain. To solve this problem, you’ll need to clean the filter.

In order to access the filter, you’ll have to open the bottom panel of the housing, the plug that contains the filter will be found on the bottom right.

Samsung washer is not working at the right temperature

this is when you can’t get your washer to work at the desired i.e it is cold when you need it to be hot or the other way round.

Solutions

first, you should ensure that the faucets are fully on. Then, you should be sure that each hose is connected to the right faucet. The water heater is the next stop.

It should be set to deliver water at a minimum of 40°C. The water heater capacity and recovery rate is also a factor that should be considered.

Finally, you should check the inlet filters in the water hoses. Clogged inlet filters cause hot water to flow in too slowly.

Samsung washer leaks during rinse

there’s a number of reasons for you to find a leakage in your washer. Leakages mainly occur during use, as that is when the washer holds the most water.

Solutions

Ensure that the door is completely locked. Be sure that there’s nothing obstructing it from closing. The drain hose should be positioned at the right angle, and the water supply connection must be properly tightened.

Finally, you should check for any damages or punctures in the hoses and interior lines.

 A good idea of Samsung’s error codes coupled with the information on this article and the right tools are all you need to solve the various problems your Samsung washer can bring your way.